Polyurethane varnish SURE XS
SURE XS Varnish is a two-component varnish.
- Perfect for protecting microcement applied to floors, showers, and countertops.
- Furthermore, its excellent mechanical and chemical properties make it an ideal choice for both residential and commercial applications.
- This product offers a very long working time, making it easy to apply.
- The formulation of SURE XS varnish is based on the latest technological advancements, offering exceptional properties and a flawless aesthetic finish.
Polyurethane varnish for Micro ciment coating
Description of polyurethane varnish
Silex varnish is a two-component, water-based urethane varnish that offers superior protection against water and stains.
Specially designed for high-traffic areas and damp rooms, it makes surfaces more durable and waterproof.
It must be applied in 3 coats, the first coat acting as a primer. Read the instructions below carefully.
*** The Micro ciment Kit for countertop, floor, and shower already includes the required quantity of Silex water-based bi-component urethane varnish.***
Specifications
Touch | 1 heure |
Cover | 3 - 4 Hours |
Light traffic | 24 Hours |
Furniture | 24 Hours |
Fully Cured | 7 Days |
Cleaning | Water / Mild Organic Products |
Mass loss at Taber test
| 8 mg (ASTM D4060 with abrasive wheel CS-17) |
COV | 3 grams per liter |
Working Time | 25 minutes |
| Storage and Preservation | 6 months in its original unopened packaging, stored in a temperate location, protected from freezing. |
Surface to cover | Part A | Part B | Total quantity |
25 s.f. | 81ml | 55 ml | 136 ml |
55 s.f. | 179 ml | 121 ml | 300 ml |
110 s.f. | 358 ml | 242 ml | 600 ml |
The coated surface will be easy to clean with mild organic products, allowing you to maintain impeccable hygiene..
Instructions
This varnish serves as both a primer and a protective coating.
STEP 1 - Application of 2-components Varnish - FIRST COAT:
- Make the mixture respecting the proportions (3 A for 2 B),
- Let the mixture rest for 10 minutes once it has been stirred.
- Mix 7 parts water into the catalyzed mixture.
- Using a lint roller, apply generously over the entire surface, then roll to remove excess.
- The pot life of the varnish is 15 minutes*.
- Apply a first coat of using a foam paint roller.
Drying time: Once this first coat is dry, the second coat must be applied.
Advice: The 3 coats must be applied on the same day, otherwise light sanding is required between coats.
STEP 2 - Application of 2-components Varnish - SECOND COAT:
- Repeat the same operation as for the 1st coat of varnish (Primer) HOWEVER, the ratio of Qualified Varnish and water must be: 2 parts water to one part varnish.
Drying time: When dry to the touch.
STEP 3 - Application of 2-components Varnish - THIRD COAT:
- Make the mixture respecting the proportions (3 A for 2 B), without water.
While the varnish is durable over time, to preserve and enhance the beauty of your showers or floors while reinforcing their protection, we recommend applying a new coat of varnish every two years..
Application Steps
Wear protective equipment
For your safety, it is recommended to wear gloves, a mask, and glasses.
